PS4 Controller Not Charging, No Lights-Fix It in Second

A controller is a device that works hand in hand with the playstation version 4, which works in both a wireless and wired way—the playstation 4 controller charges when you plug it into a USB. When you find out that the controller is not charging and that there are no lights, there must be an issue with the playstation controller.

Some common issues with the controller can cause the problems above with the controller. The major problem is with the battery that fails to work, maybe because it is old that you need to replace it or that it has average damages. However, before concluding on that one issue,consider checking for some other issues that can be upcoming to solve the issue.

The article below shows the possible ways of fixing the issue with the controller and the causes. There are also the table of contents before, the frequently asked questions, and the conclusion.

How to fix the PS4 controller that is not charging and there are no lights

If the Playstation controller is not charging and there are no lights to show any problem, consider checking the steps below to fix the issue.

Techniques used

i. Check the connection between the charging cable and the controller

In most cases, the controllers charge using the USB cables that have weak pieces of wires holding the battery and the controller in place to transfer power. Therefore, if your controller is not charging after inserting the cable, consider removing it from both the controller and the battery and re-insert it. Ensure the cable connects carefully to both devices for them to communicate. Sometimes the poor connection between the cable and the controller via the battery affects the charging process of the controller.

Avoid using loose cables that fall out after connecting them to the battery and the controller since most are old and not working. Consider checking the clips available in the connector before using it since it shows if the cable is suitable for use.

ii. Use a different USB cable

USB cables for use are readily available in the market, so you can choose to buy a new one or use any available at home. Check Amazon for the best USB cables to connect the controller and the battery. USB cables are ubiquitous in many shops; if it is a problem, you can quickly get a way of solving it.

It is advisable to use USB cables that can transmit data and at the same time charge the controller. Therefore, if you get any USB cables, they can sometimes perform only one function if it is cheap.

iii. Use the USB cable in a different device apart from the PS4

In some cases, the PS4 controller is the one that is not working with the USB cable, so you need to check the cable with a different device to know its state. The USB cable can work with laptops, phones and other devices that you can test. If the cable works with the different devices, it means that the ports with the controller are the ones with the issue and that you need to replace them.

iv. Check and clean the charging port of the playstation controller

The USB ports with the controller can be dirty or contain some debris that accumulates in it such that it prevents the transmission of power from the battery to the controller and fails to charge. If the port has only dust, you can wipe it away and still use the port; however, if it contains large debris, you will need to wash it to remove the debris.

When cleaning, consider using canned air or an electric blower to remove the debris from the charging port and get a good light source to check for any dirt. If there are any dirt particles, you can continue the cleaning process until everything is fine. Check Amazon for the best electric blower for cleaning the devices. However, if the port has any signs of being old or having damage, consider replacing the system.

v. Change the settings with the playstation controller

Some settings or software in the controller prevent it from accepting chargers until you remove or disable the settings with it. In most cases, firmware prevents the controller from receiving power. Therefore, if you need to fix the issue, consider inserting a toothpick or any pin at the firmware position of the controller for some time, plug the controller in and restart the playstation then read the difference with the controller.

vi. Power cycle the playstation 4

After trying the above methods of fixing the controller and nothing shows a change, consider power cycling the system since it works. To power cycle, the playstation chooses to shut down the playstation and the controller, remove it from any power source and give it time while unplugged. The process helps the power in the playstation to be transmitted to the controller.

vii. Change the playstation controller charging port

When the charging port is loose or broken, it will fail to transmit power to the controller. Therefore, you need to check that if it contains any defects, you need to replace it immediately. You need to remove the controller from the central system, remove the charging port board, disconnect the cables for charging via the port board and the mainboard, and fix a new charging port in the controller.

viii. Change the playstation controller battery you are using

If you try everything with the playstation and note there is no difference, choose to use a different battery since the only problem could be the battery or that the controller is terrible and you need to replace it. Choose to check the controller and do some repairs if you are willing to maintain it for use or purchase a new one. Check Amazon for the best playstation controller to replace in the system.

However, if the problem is with the battery, you can easily replace it since it involves fewer and manageable steps, unlike with some controllers whose batteries are not replaceable. The best thing you need to do here is remove the controller from the central system and remove the battery pack. You will get the circuit board that you will remove to fix a new battery in the battery pack. Check Amazon for the best Ps3 controller

Causes of the PS4 controller not charging and no lights

When the PS4 controller fails to charge and shows any lights, there could be several causes you can use to check and fix the problem.The problems can be the charging port or cable that prevents power from getting into the USB, or the issue could be that the controller battery is the issue. Below are some of the issues:

• Issues with the charging port

The charging port can cause the controller to fail to charge because it can have dirty particles like dust or debris that accumulate and cause failures. Therefore, if you note the problem with your controller, consider removing the dirty particles in the charging port by cleaning the area or instead replacing the whole charging port.

• Issues with the charging cable

The charging cable may be broken or worn out, which makes it bad such that it cannot charge the controller. Sometimes you can use a charging cable that is not meant to work with the controller that fails to charge it. Therefore, you need to check the type of cable you are using and check if it is terrible to replace it for use.

• Issues with the playstation

The play station is the device that holds everything that it holds the controller to. Therefore, if the playstation has some issues, it can cause the controller not to light and charge too since it prevents every connection between the controller, the cable and the charger. To fix the playstation, consider resetting the controller or the power cycle in the console or use a different charger or battery for the controller.

• Hardware issues

The typical hardware issues are the battery and the charging port. Either the battery is old and cannot hold and charge for providing power to the controller, or the charging port is not communicating with the controller to receive power. Therefore, all you need to do when having such problems is replace the battery and the charging port to fix the issue. Check Amazon for the best batteries

You might be interested to know about How to Fix ps4 Remote Play Connection That Is Too Slow

Frequently asked questions;

• Can one connect the play station via a USB cable or Bluetooth to transmit data?

Connecting the playstation to any external device can work best with a USB cable or Bluetooth connection since it is faster and more reliable. Therefore, with anything related to transmitting data from the pay station, choose to use the methods above.

Conclusion

The article above shows the causes of the PS4 controller not charging with no lights, and there are solutions to fix the issue. Check on the guide to solve the issues with your PS4.

Kindly check on the guide to fix the issue, and if it feels hard for you to fix the problem, consider contacting a technician to help solve the problem.There is always a solution for any problem with the PlayStation.