It is possible to play audio through all your home Surround sound speakers. Surround sound systems are a simple way to improve your home entertainment experience. The addition of surround sound to your sound system will significantly improve your music’s overall sound quality.
The vast majority of home theatre systems can operate in 5.1 or multichannel mode, which means they can play audio through all of their speakers simultaneously. But how is this done? Unfortunately, most home sound systems are difficult to understand due to their complexity. However, if you experience any problem while playing music on your surround sound system, this article will help you.
If you would like to play music through all your surround sound speakers, this guide will be of great help to you. It gives the best tips on achieving the best sound quality from the surround sound speakers. It also guides you on how to handle the various issues you might encounter when playing the music and the best answers to the frequently asked questions on surround sound speakers.
How to play music on all Surround sound speakers
Today’s technology converts stereo sources into surround sound, appropriate for films and music alike. Presently people can choose the perfect AV receiver and provide their homes with great sound, but it is worthwhile to check the AV receiver reviews, set priorities, and make the correct decision.
Investing in a high-quality AV receiver is the most effective solution to create streamlined surround sound conditions in your home. Such devices typically have a large number of parameters, allowing them to play music in various formats.
How to achieve the desired sound
To achieve the preferred sound, the Surround system’s components should be placed strategically. If you’d like to maintain a perfect tone, it is essential to implement your speakers properly. Follow these simple steps:
ü Place the subwoofers that are available in the center of the entire composition. Stay away from corners and walls.
ü Distribute the front speakers along both sides of the television.
ü Raise the volume of the front speakers. The sound quality will be incredible as a result.
ü Placing the sound systems on the plane of the television could also be a good idea.
ü Place the receiver next to the television and turn on the system to experience the power of your audio.
Common problems when playing music on the speakers
As said earlier, surround sound systems are extremely sophisticated devices. In a world where there are so many different positions and wires to connect and arrangements to make, it’s very easy to make a mistake and not achieve the best results.
To ensure all speakers work in surround sound, we must first determine how they will work. Various issues could arise. There are numerous potential difficulties. Fortunately, the majority of them have straightforward explanations and solutions. With time and experience, you will be able to comprehend everything much better. For those who are just getting started, here’s what you should do if something goes wrong;
1) There is absolutely no sound
You have completed the process of positioning speakers in the proper locations, installing wires, and configuring the system. Still, all of a sudden, you suddenly realize that the speakers do not produce any sound. Unless there are issues with your power that might destroy everything, you should be able to resolve the problem fairly quickly.
i. Remove the receiver from the wall and check to see that no power is coming through.
ii. Confirm that all of the connections are secure, including electrical cables, speaker wires that have been pushed in, exposed wires that have been tightly held, among others.
iii. If the issue persists, go into the receiver’s settings and experiment with the speaker configuration.
iv. If nothing seems to work, you may have to allocate channels and the speakers yourself if nothing else works.
2) Poor front speaker sound quality
This issue is usually resolved by adjusting the receiver’s settings. Mastering how to get all of your speakers to work together in surround sound is crucial once you determine the main problem. Since most speakers are either large or small, the receiver setups cover a wide range of possibilities. Your system may fail if you select the incorrect type.
i. Navigate to the receiver’s settings and select the appropriate size.
ii. For satellite speakers, go for a small size.
iii. If you have free-standing speakers that are heavy or tall, go with the large size.
iv. In addition, you should fine-tune the crossover in the subwoofer.
v. If your front speakers cannot handle the amount of sound (especially bass) being played, horrific and blurred music will be heard.
vi. Establish a starting point of 80Hz and constantly adjust it until you achieve the desired audio quality.
3) No sound coming from the surrounding speakers
The first suggestion is to maintain the volume low, which is a common mistake among newcomers. Certain movies or scenes may be too quiet, giving the impression that your surround speakers are not working. Next, increase the volume; this will solve a good percentage of all the issues. You will need to navigate through the receiver configurations to adjust the volume. There will be a setting for every speaker.
4) Check to see that the connection of the speakers is properly configured
It is standard practice when listening to music through the receiver, as most songs are mashed for no more than two systems. First, configure the receiver to convert 2.1 audio to 5.1 or greater sound quality. Although the exact settings differ from one receiver to the next, most of the receivers have this option under the DSP settings.
Testing sources to ensure that they are capable of producing full surround sound is essential. If you’re using a Blu-ray player, make sure the output is set to a multichannel stream.
5) The sound quality in the speakers is poor
It’s difficult to work with high ceilings and ceiling speakers, but it’s relatively simple to get rid of terrible noise. Changes should be made to the receiver’s settings, most notably the codec settings. Changing the height of the speakers could resolve the issue that could be associated with incorrect wave bouncing. To see if there is a difference, compare the new position to the previous material. If the manufacturer recommends a particular position, consult the owner’s manual.
6) Humming sounds
At some point during your learning process of how to make all of your speakers work in surround sound, you might unavoidably encounter an irritating hum. One of the biggest causes of the problem is that two different devices share the electrical circuit. It is known as a 60Hz ground loop, and it is an interference signal that annoys. As a result, it can be difficult, but not impossible, to get your speakers to sound right.
ü Identify the problematic elements.
ü Increasing or decreasing the volume on the receiver will reveal whether or not there is a problem.
ü If you still hear a hum, try switching to another input and listening for it.
ü The cables that connect the receiver to everything else should be unplugged and thrown away.
ü The speakers, and the power supply in the receiver, should remain connected at all times. The issue may require some attention if you can locate it.
ü The isolation transformer must be purchased if the problem is with the cable television.
ü An isolator for the ground can be used if you can locate an alternative source of power.
ü If you are unsure of what you are doing, contact customer support or a technician.
7) There isn’t any bass
You may need to experiment with different crossover frequencies if you are having difficulty hearing bass. As a first option, it should be considered. Starting at 80Hz and increasing in small increments will be necessary once more.
8) Take a look at all of the connections
Double-check to see that the RCA cable linking your subwoofer and the receiver are connected properly. The placement of the subwoofer should be carefully considered in advance. Typically, it should be in a corner, a distance from the walls, near the front speakers, or from the edge of where you will be listening.
After placing the subwoofer in the right position, you can move around on the floor to discover the appropriate sound that the bass produces. As a result, you will be able to place it in the proper location.
Frequently Asked Questions;
What is the appropriate way of setting up surround sound speakers?
When using a 5.1 system, the surround speakers should be positioned to the sides of one listening position for optimal sound quality. For the best performance, direct the speakers directly at you. If it doesn’t work, place the surround speakers a few meters behind the listening point and face forward.
Conclusion
Learning how to ensure that all speakers operate together in your surround sound is a matter of practice. To figure out what’s wrong, users have to try different things. Some issues can be resolved quickly and easily as most of them are simply the result of slight mistakes in the setup. A professional electrician may be required for some of the other jobs.
In conclusion, ensure you have your surround sound speakers perform excellently by following the guidelines above. However, when working with cables and electricity, you should exercise caution because you could cause serious injury to yourself.
