Maytag washers are suitable for their durability and quality features to run their activities correctly. The Maytag is a famous brand with convenience, performance, and user control that surpasses other machines. However, even though the device has quality properties, it will still have some faults later that will cause some of its problems which cause the squeaking noise.
The most common issues with the noises with the Maytag washer squeaking noise are the faults with the tub bearing or the motor coupling, a worn drive pulley, damage to the clutch assembly, or a clogged drain pump. Sometimes they can make noises when they have a lot of loads to handle when running.
If you have a Maytag washer with such noises when using it, you are at the right place to know the issue and you can troubleshoot the issue after you have identified it. The article below will describe the possible ways of solving the problems from the washer. I will also explain the causes of the noises in the machine, which are primarily from its parts and then the frequently asked questions, and lastly, the conclusion.
How to fix the squeaking noise from the Maytag washer when agitating

Before fixing anything with the washer, it is good that you collect the necessary materials that you need for the whole process to be complete and successful. After finding the required tools, it is now time to check on the causes of the noise so that you can go directly to the area you are feeling like is causing the problems to you. Below are the steps to follow to carry out the exercise.
Tools needed
- Gloves
- Screwdriver
Technique | Function | Essential product |
Switching off the machine | To prevent transmission of power | |
Open to check the inner parts. | To inspect the internal parts carefully | |
Inspect the pump and pump motor | To check the issues with the pump and its motor | Check Amazon for the best pump motor |
Check the state of the drive belt | To identify the issues with the drive belt | drive belt. |
Check the motor coupling and other parts. | To check the problem with the motor coupling | Check Amazon for the best motor coupling |
Consult a technician |
Steps to follow for the troubleshooting process

The following are the possible steps or guides that you can follow when you want to troubleshoot the machine.
i. Switching off the machine
Before starting any activity with the washing devices, it is good to switch them off to avoid electrical damage. Therefore the user needs to unplug the washer from the main socket carefully to avoid some transmission of power that can occur when you switch off the main socket. When the washer is off, you have the chance to check on the parts that transmit power without fear.
ii. Open to check the inner parts
Carefully open the cover panel of the washer by removing it gently and placing it in a clean place to help prevent dirt from accumulating in it. After opening the inner part of the washer, you can access the areas that you can be free to remove, check on what is happening, and fix it with ease.
iii. Inspect the pump and pump motor
After removing the cover panel, inspecting the parts with faults is now time. Let’s start with the pump and motor since the pump and motor are two things that work together to provide water for the washer to clean. Therefore check the washer for any faults and fix them immediately.
iv. Check the state of the drive belt
Check the drive belts if it is loose or just old so that it makes noise when the washer is agitating. The nose from the belt can arise when there is any foreign material or the belt might be having s problem and need to be repaired or replaced. If there are any issues, choose to repair or replace the whole thing if the problems are worse. You seek some from experts to repair and change the belt if you don’t have an idea to do so. Check Amazon for the best drive belt.
v.Check the motor coupling and other parts
Check the motor coupling if it has some errors and makes sure everything is running in the right place. If the motor coupler is in its proper state, consider checking other parts like the bearings, the tub straps, drive motor, pump belt, and others such that if there is anything loose, you can tighten or replace it to reduce the noise. If you try everything with this step but nothing is working, move to the next step.
vi. Consult a technician
Sometimes you can choose to start a process independently, fix everything, and it becomes OK. However, in this case, you can be trying to make sure everything is OK such that you select everything in place, but they are not working. Such situations can occur when the issue is big and difficult and you can solve it or correct it by yourself even if you have all the necessary tools for the exercise. With such cases, consider asking for a technician to help improve the problem with the washer.
Causes of the squeaking noise in the Maytag washer when agitating

- Defective tub bearing
If the Maytag washer produces the unusual squeaking noise when agitating, consider checking the tub bearing, which can have faults. The tub bearing is at the bottom part of the outer tub and mainly helps the inner tub to run smoothly. Therefore, if the tub bearing has faults, you can quickly hear the loud squeaking noise since the machine has metal parts that rub against each other.
- Faulty motor coupler
A faulty motor coupler can cause the loud squeaking noise when agitating in the washer. To locate the motor coupler, check-in between the drive motor and the direct-drive transmission that works primarily to protect the engine from direct damage. The coupler gets the faults mostly when you overload the washer, which causes the noise when working.
The primary function of the motor coupler is to prevent the motor from having damage where it will still function even if it gets old or wears out. When you identify such a problem, consider replacing the coupler as soon as possible to eliminate the squeaking noise.
Check Amazon for the best motor coupler
- Old drive pulley
A drive pulley in the washing machine is purposely for making the tub spin. In the drive pulley, a belt also causes the tub to spin. However, the washer sometimes can be overloaded, or the users have been using it for a long time that the pulley can bend, get damaged, or wear out, which makes the washer make noise when using it. Ensure that you check the pulley if it is working well or is having any kind of problem. Normalise using new and modern pulleys to avoid such issues from disturbing you.
- Damages with the clutch assembly
The washer clutch helps connect the washer transmission with the inner tub. In some cases, people use the clutch assembly in locking the transmission input shaft to the wash basket drive during the spin cycle. When the process occurs several times with your machine, there will be friction between the clutch pads that cause a squeaking sound of the pads as they work.
Sometimes, before the clutch starts making noise, it will first show some signs like dust in the brake or maybe shaving on the washing machine’s lower surface or some smell. Therefore, if you hear such sounds consider replacing the clutch assembly before making more noises.
- Faulty agitator cogs
Some people refer to the cogs as the agitator dogs that can help operate the dual-action agitators’ upper area. Therefore, the cods communicate with the dogs to run in the same direction when the machine is running. So, when the agitators become faulty, they tend to be too smooth to enable the connection in the same order, and they can slip while moving to cause a squeaking noise in the machine, disrupting the user.
As the machine user, you can find good ways of inspecting the agitator, which you start by disconnecting the agitator from the power source before moving on with other activities. When you have the best guide that will help you to inspect if the agitator is having a problem will help you to solve such kind of problem when it arises. But when the problem is complex and complicated you can seek help from some professionals.
Conclusion
When a washer is running, you can hear some noises depending on the activities inside it since the noises increase and decrease with the volume of load. If you hear such noises with your machine, try using the steps above to fix the problems. Remember to check on the causes to cite the exact place to centre on, which is also in the article.
You should follow the manufacturer’s instructions in the manual book when carrying out the fixing process since they guide you to reach the stated parts with faults. However, if you fail to fix the problem correctly, kindly consult a technician to find and fix the problem.