The trigger states that the user perceives it dynamically adjustable in different ways with a motor-driven, force-feedback trigger configuration. The force-feedback motor, for example, might drive the trigger to modify the user-perceived resistance of the user-actuatable catalyst. In another scenario, the force-feedback motor could cause the trigger to simulate a hard stop that effectively alters the trigger’s pull length or range of rotation.
The existing triggers on the Xbox One controller are unique, and they include rumble technology for more precise controller vibration. The function shines in supported titles, whether it’s driving across rumble strips or firing high-caliber guns. Additional improvements could broaden this concept, affecting how players interact with certain games. According to previously leaked “Elite V2” photos, the game has experimented with joystick tension control; however, this would be player-configurable according to personal choice.
This guide will show you how to remove the rumble motors from the triggers. This task necessitates complete disassembly of the controller’s triggers.

Tools required
Purchase these tools.
T6 Torx Screwdriver, zTR8 Torx Security Spudger for Soldering Workstation Screwdriver\sTweezers\sParts
Step 1: get a battery pack.
Remove the cover from the battery pack.
Remove the batteries from the system.
Step 2: Handles on the sides
This step is best done with a nylon spudger. The image depicts a metal spudger.
Remove the side handles by firmly gripping the controller and inserting a spudger into the gap between the front and handle plates.
Move the spudger back and forth to pry the side plate away from the front plate. That must be done around the seam of the side plate.
Step 3: the Screws
Punch a hole through the center of the label with a screwdriver.
Behind the label, there is a secret screw in the middle of the controller.
Punch a hole through the center of the label with a screwdriver.
If you don’t want to puncture the label, you can lift it instead.
Using the T8 Security Torx Screwdriver, remove the five 10mm screws on the rear of the controller.
Backplate is the fourth step.
Remove the backplate and discard it.
Back-to-school shopping list
Upgrade to a solid-state drive (SSD), replace your old batteries, and get to class.
Kiosk Repair
Step 5: Install the faceplate.
Remove the faceplate and discard it.
Step 6: Install the Motherboard on the Top
While holding the red and black wires down on the top motherboard, de-solder the soldered junctions.
Allow the rumble motors to dangle freely from their sockets.
While holding the red and black wires down on the top motherboard, de-solder the soldered junctions.
Remove the black and gray wires from the top motherboard and de-solder them.
Remove the rumbling motors and place them in a safe place.
When using the soldering iron, be careful not to damage other components or injure yourself.
Step 7:
Remove the two 7mm T6 screws near the rumbling motor sockets by unscrewing them.
Remove the two 7mm T6 screws near the rumbling motor sockets by unscrewing them.
Step 8
Grasp the sides of the motherboard near the middle with both hands.
Lift the motherboard upwards while gently wiggling it forward and backward.
It will take some effort to lift the motherboard.
Step 9:
Trigger the rumble Motors
Remove the yellow tape on the front of the controller that holds the wires in place.
Step 10:
Remove the two 7mm T6 Hex screws from the triggers’ underside.
Step 11:
Take out the trigger covers
Step 12:
Remove the wires from the motherboard and disorder them.
Pull the wire with the rumble motors out of their sockets.
How to use a normal Xbox One controller to add trigger stops

One doesn’t require any unique tool or waste a great time. Set aside five minutes to read the following:
That is all there is to it. A plastic pry tool is included in the Quickshot kit to assist you in removing the existing grips and replacing them with brand new ones. It’s straightforward to use the Quickshot.
- Pry the rear grip out of the Xbox controller using the plastic pry tool. It’s preferable to begin towards the upper side, near the trigger, because you will have an easy time getting to the edge.
- Pull firmly away from the controller body once the grip has popped out. Plastic lugs attach it, but they’re pretty challenging, so you’ll have to be firm.
- On the other side, repeat steps one and two.
- Push each Quickshot grip down firmly until it clicks into place. Ensure that you push down around the edge of the controller to ensure a flawless fit.
It’s as simple as that. Your standard Xbox One controller now has fully functional trigger stops. Move the orange latch over to activate them, and you will see the advantages of less trigger travel right away.
Does it have any cons?
The Bionik Quickshot performs just as advertised. My only lingering concern is the product’s longevity, given that it’s entirely made of plastic. Still, you also do not have many expectations from a primary Xbox One controller these days. At the very least, this isn’t a costly accessory.
Expectations are what you should have. While the Quickshot works and shortens the travel of your triggers, it doesn’t have the same effect as the Elite Wireless or Razer’s controllers as an aftermarket item. With the stops on, the two have a substantially short trigger journey. They’re also quite pricey, at over $100 each.
However, if you enjoy console shooters and want to improve your gameplay without buying another controller, the kit will help you. Again, it will also provide a sizable sticky region to ensure that items don’t slip at the critical moment. In addition to black, it’s also available in white.
Frequently asked questions
Drift on the Xbox One Controller: What Is It?
The most typical occurrence is drift in the left analog stick, which presents itself in first-person games as your character is always gazing up. The right stick, on the other hand, can suffer from drift concerns. You might also note that if you move one of the analog sticks in any direction, it will continue to detect that movement long after your thumb is removed from the stick.
There are three leading causes of Xbox One controller drift:
- Thumbstick pad that has worn out: Each thumbstick comprises a boxy sensor component on top of a moveable shaft and a rubber or plastic component that snaps onto the shaft. If the rubber or plastic piece becomes worn, it can be replaced or repaired to correct the drift problem. In certain circumstances, filthy thumbstick pads might produce a similar situation.
- Worn-out springs: When you withdraw your thumb off the thumbstick sensor, two springs help it snap back to the center. You’ll notice drift when one or both springs wear out. The problem is resolved by replacing the springs.
- A bad thumbstick unit consists of a boxy sensor component attached to the controller circuit board for each thumbstick. If this component fails internally, the only way to remedy it is to replace it with a new one.
What is the best way to clean your Xbox One controller?
It’s simple to clean your Xbox One controller with a dry towel, whether it’s been sitting in a cabinet for weeks or is covered in fingerprints from constant use. Remove fingerprints, dirt, and other smudges from the outside of your Xbox One controller with a microfiber cloth. That should help remove a lot of the dust that collects on top of electronic gadgets, especially those sitting on shelves or behind TV stands for a long time.
Microsoft does not advocate opening your gaming controller yourself, and a professional should handle any internal repairs. Microsoft also advises against using any form of liquid cleanser, as even cautious use might cause moisture to collect inside your controller. Here’s how to clean your Xbox One controller quickly, as well as the tools you’ll need.
1. Take off any grips from your controller. If your gadget is charging, make sure it’s unplugged before cleaning at this time.
2. Wipe off the entire exterior using a microfiber cloth. These are frequently the same as eyeglass lens cloths. Dust cloths are another cleaning cloth.
3. Wipe down the entire controller with the cloth. To remove fingerprints or smudges, rub them away in circular motions.
4. If you find any extra build-up in the buttons or ports of your controller, use a can of compressed air to remove it carefully. These cans are available in both low-cost and high-cost versions. Regardless of the type you use, clean the charging ports in short bursts to remove any dust.
Conclusion
Sorry to hear your RT button is failing; it’s an indication of heavy use and a lot of gaming! I refer to it as nerfing when this happens since the button loses its crispness and becomes mushy. Yes, there are ways to disassemble your controller and “try” to repair it.
However, I must emphasize that we do not recommend self-repairing your equipment in any way. That’s when you realize it’s time to upgrade your controller.