How to fix a Stanley Fatmax Spotlight (easy fix)

Stanley is a worldwide famous brand producing a wide range of products for more than 170 years. Electrical appliances, handling tools, laser levels, measurement instruments, and storage systems could all be in the equipment. In terms of performance, the Stanley Fatmax Spotlight is both efficient and long-lasting.

The Stanley Fatmax Spotlight, like any other electronic equipment, might develop faults that cause it to work ineffectively. It necessitates an immediate investigation into the problem. A non-removable inbuilt lithium-ion rechargeable battery powers the Fatmax. Recharging the battery with an AC wall charger or a 12V DC vehicle charger is a straightforward process done at home or in the car. If you use the flashlight after the battery dies, it will continue to work when plugged into the wall charger that comes with it.

The Stanley Fatmax spotlight will allow you to illuminate your working environs whether you’re at home, in a vehicle, participating in outdoor activities, or in the event of a roadside emergency or power outage. It is a handy tool to have. If you don’t already have one, I recommend getting one because it can save you a lot of money. This article will show you how to resolve any issues with Stanley Fatmax Spotlight’s functionality. To get your device fixed, make sure you carefully follow this guide.

Steps on how to fix a Stanley Fatmax spotlight

Stanley Fatmax Spotlight fix

There are many reasons why the Stanley Fatmax spotlight may fail to function as usual. The leading cause includes a faulty battery, failing spotlight and using dead battery. Despite the spotlight malfunctioning, there is a recommendation on how to bring your Stanley Fatmax spotlight to functioning. Follow the steps below;

    i.  First, have all the materials necessary. The materials include; a new Stanley Fatmax spotlight charger, a new battery charger, a new flashlight if the other one is faulty.

  ii. Inspect all spotlight parts such as the button and identify the spotlight’s possible causes failing to function.

  iii. If the spotlight button is faulty, replace it with a new one that is functioning well.

  iv. Check the battery carefully and if faulty, replace it with a new one that is functioning normally. If the issue persists, proceed to check the condition of the whole spotlight.

  v. Replace the spotlight if the issue persists. Also, consider taking the spotlight to a professional manufacturer to help you fix the problem.

Checking the charge condition of the Stanley Fatmax Spotlight

Just above the 12 volt DC charging connector is the charging status LED indicator. The battery and charge status indicators are on the flashlight’s back, above the 12 volt DC charging connector, and beneath the waterproof end cap.

When you recharge the battery in the spotlight, it will light up or flash in three colors.

  • Green and red (alternating flashing) – The battery is overheating due to extended use or recharging. When this happens, the charging process is interrupted, but it will resume immediately after a brief cooling period.
  • Green lights; – The battery in the spotlight is fully charged.
  • Orange indicates that the battery is only partially charged.
  • You need to recharge the battery, as indicated by the red illumination.

When you turn on Stanley Spotlight

§  The battery is operating at full voltage, as shown by the green illumination.

§  The orange light indicates that the battery is operating at a low voltage.

§  Red glow indicates that the spotlight’s battery is low on charge, and you must refresh.

§  Green: The battery is fully charged.

§  Orange indicates that the battery is only partially charged. When you trigger the device’s built-in low voltage protection, it will shut down automatically. Recharge the machine as soon as possible.

The following colors will flash as you change the dimmer selector:

1. Green flashing indicates that the light is adjusting to a lower brightness level.

2. Red flashing indicates that there are adjustments of light to a higher brightness setting.

3. A green flashing light indicates that the light is adjusting to a more fabulous brightness setting when adjusting the dimmer selection.

Charging of the Stanley Fatmax Spotlight.

When this item is shipped, it is half-priced. Use the 120 volt AC charger or the alternate 12 volt DC charger to charge the thing for 3-5 hours. Charge until the green LED indication on the battery/charger illuminates.

How to reduce the danger of damage.

  • Make sure the item is thoroughly dry before charging or recharging it. If the unit is submerged, wipe it dry before opening the end cap. Water can irreversibly damage the device if it gets into the charging port.
  • Connect the barrel connection of the AC charger to the unit’s 12V DC charging port. Use a 120 volt 60 Hz North American plug (powered).
  • Charge until the battery/charge LED signal changes from red to green.
  • Be careful not to overtighten it.

Tips for troubleshooting

Stanley Fatmax Spotlight

1) The LED that indicates the battery/charge state does not light up when charging;

1.     The battery has entered overheat protection after prolonged use. Allow the spotlight to cool for a few minutes before recharging it. The device will not charge while in use.

2.     Before continuing, please double-check that the Spotlight end ensures they are off.

3.     Make sure that the charging port for the 12V DC power source is connected correctly.

4.     Double-check the alternating current or direct current power source connection.

5.     Examine the AC or DC to confirm that it is in good operating order.

2) The device will not work.

The battery goes overheat protection mode after completing a full charge or recharging. Allow a few minutes for the spotlight to cool before turning it on. While you are charging the spotlight, it is not feasible to use it. Ensure you disconnect all adapters before utilizing the spotlight. Charge the device according to the manufacturer’s instructions.

3) Disposal of the batteries

  • Before disposing of batteries, cover exposed connections with electrical tape.
  • Keep batteries away from flames and high heat. Don’t let the batteries catch fire.

4) For a 12v DC charge, replace the fuse.

a) Remove the end cap from the DC plug.

b) Disconnect the central contact of the spring.

c) On the fuse, use a continuity tester.

d) Find a replacement fuse that is five amps and 250 volts.

e) Replace the fuse, spring, contact, and end cap if necessary.

f)  Using your fingers, tighten the end cap clockwise until it is finger-tight.

g) Check that the 12v DC Charging Adapter is working properly.

To lessen the possibility of property harm;

§  A 5 watt LED heats up quickly. Avoid touching a hot lens, guard, or enclosure with your hand.

§  Don’t look blankly into the light or aim your gaze directly into the eyes of others.

§  Keep away Sharp objects from the lens since they can cause it to break or crack.

§  Avoid exposing highly high temperatures to this gadget.

§  Keep the flashlight from falling or being thrown. It comes with a rechargeable nickel-metal-hydride battery technology.

To lessen the risk of electric shock;

Only charge your smartphone when you’re inside.

  • If you’re using an extension cord, be sure the indicated rating of the removable power supply cable or extension cord is at least as high as the spotlight’s electric power rating.
  • Organize the cord so that it does not dangle over the work area or tabletop since this could cause it to fall over.
  • Avoid putting chargers in liquids.
  • Only the AC or DC adapters that come with the unit should be used with it. Connect the charging adaptor to the flashlight first and then the power source after that.
  • Do not overcharge the Fatmax Spotlight; charge it for 5 hours.
  • Charger adapter cords should not be crushed, cut, pulled, or overheated.
  • Arrange to charge adaptor cords so they don’t tangle or provide a safety threat. Keep charging adapter cords and sharp edges at a safe distance.
  • Do not attempt to open the case of the body. On the inside, there are no serviceable components.
  • The Fatmax flashlight is never used without the lens attached.
  • Disconnect by pushing the plug rather than the cord to avoid damaging the electric plug and cables.
  • If the charger on the spotlight is damaged, do not charge it; instead, return it to the provider for repair.

Frequently asked questions

What is the best way to charge or recharge the Stanley Fatmax Spotlight?

Although the Fatmax can go up to a year without being recharged, the instructions recommend charging it every three months if not in use. The battery lasts around one hour on the highest setting and approximately seven hours on the lowest level. There are only three configuration options: high, soft, and off. It’s only used once in a while.

Conclusion

Owning a Stanley Fatmax Spotlight is a good idea, whether in your home or your automobile. However, handling the gadget with great care will ensure that it functions properly and lasts a long time. The Fatmax Spotlight, on the other hand, will have problems, starting with its components and continuing through charging.

Finally, make sure you follow the advice mentioned above on using the Stanley Fatmax Spotlight and fix it if there are any issues. If you have problems troubleshooting, seek the advice of an electrician. For the most incredible service, use the most qualified and excellent employees.

Leave a Comment