How to Fix the Dish Receiver That Won’t Turn Off?

Like any other computerized device around your home, your Dish receiver might encounter various challenges. Such misfortunes may hinder them. Dish receiver from turning off. The most common symptom that is associated with Dish Network receivers is that they may sometimes freeze or freeze, hindering you from using the satellite to access your favorite TV shows.

Sometimes your Dish receiver may therefore start to misbehave due to various culprits like a faulty remote, problematic TV, among others. Luckily, all these issues can be solved with simple tricks. You won’t need to opt for an expert after going through this article. We will equip you with essential information on how to restore the normal functioning of your Dish receiver.

You should therefore expect a good number of troubleshooting techniques in this article to help solve your equation. Additionally, you will know other issues that may be attacking your Dish receiver. Well, let’s explore more in the article.

Quick table:




How to fix receiver won’t turn off problem

Method 1: Resetting the Dish receiver

Step 1: Power on the Dish receiver



Step 2: Tap the Factory Defaults key



Step 3: Choose yes



Method 2: Troubleshoot the remote control

Remove the AA batteries



Scrutinize Remote’s buttons



Clean the Terminals



Buy new batteries


AA batteries

Reset the Power supply of the TV



Update the software of your remote control



Method 3: Troubleshoot your TV

Inspect the TV’s buttons



Check the TV lamp



Check the power source of the TV



Detach external devices


power cable




How to fix receiver won’t turn off problem

dish receiver wont turn off

Sometimes you might be using your Dish receiver, but when you power it off, the system fails. The issue might be emanating from the TV, the dish itself, or a faulty remote control.

I would therefore recommend checking these culprits on your devices. If you find any issue, use this guide to solve it.

Method 1: Resetting the Dish receiver

Resetting your receiver implies that you take it back to the factory settings. Resetting is essential if you intend to delete some settings from your device. This job won’t take much of your space; it’s a walk in the park.

However, lock and remote address settings won’t change, but you may start by unlocking anything in your Dish receiver. Remember, Dish receiver reset doesn’t interfere with the passwords of the system. Use the following steps to reset your receiver;

Step 1: Power on the Dish receiver

Go on your remote control and then press the menu button. There will be options displayed, scroll down and choose the “system up”. The option should be the sixth one on the menu.

Step 2: Tap the Factory Defaults key

There is a display that appears, choose the Factory Defaults key. Look at the sixth option on the menu; it should be the “Factory Default”.

Step 3: Select yes

After choosing the default, select the “Yes’. Hopefully by now your receiver has been reset. If the resetting doesn’t work for you, maybe it is high time you also think of other troubleshooting techniques.

Method 2: Troubleshoot the remote control

 Troubleshoot the remote control

Dish receivers are accompanied by remote controls to help you navigate through various options on your Television. Maybe the remote control is problematic and that’s why it’s not working as it should be. Try out the following tricks and see whether the unresponsive remote works again;

Step 1: Remove the AA batteries

The first and simple trick is to remove the batteries from the remote control batteries before you even think of attempting any action. Reinstall the batteries back in the correct terminal connection; don’t interchange the polarity.

Step 2: Scrutinize Remote’s buttons

If after removing the batteries and you see no change, consider checking or inspecting the remote control after every step. I say so because each step is entitled to solving a different problem.

Step 3: Clean the Terminals

It is possible that your remote control isn’t working as a result of corroded or dirty terminals. The remote control will automatically become unresponsive because of static electricity.

Remove the AA batteries and then long press the power button of the remote for a few seconds or sometimes even minutes. Reinstall the batteries in the bay and see if the problem is gone.

Under this step rubbing alcohol should help you clean the battery terminals; subject them to thorough cleanliness. Alternatively, you may scrub the terminals with a flathead screwdriver and then wipe them with a soft cloth.

Step 4: Buy new batteries

If you doubt the current batteries, don’t hesitate to replace them. Maybe you are operating with the worn out batteries, rendering your remote control useless.

Step 5: Reset the Power supply of the TV

This action is very important in getting rid of any issue emanating from external factors. Ensure there are no devices connected to your Television.

Step 6: Update the software of your remote control

The remote control sometimes may be the problem and that’s why the symptoms keep on repeating. I don’t know the remote type you are using, but it can be wireless or infrared.

Check on the user manual for more troubleshooting information if up to now, there is no change with your Disk receiver.

Method 3: Troubleshoot your TV

Troubleshoot your TV

Troubleshooting your TV is very simple with the following steps;

Step 1: Inspect the TV’s buttons

Checking the buttons of your TV ensures that they are working as they should be. In situations where these buttons are in good working condition, then you may go on and inspect the remote control’s devices.

If the buttons become reluctant, advance to the next step to proceed with the process.

Step 2: Check the TV lamp

The second step is to observe whether the TV’s lamp is on or not. If it is on, then the TV is just in good operation.

Step 3: Check the power source of the TV

Thirdly, you are required to inspect and correct any issues emanating from the power source of the TV. If it works for you, well and good, but if it doesn’t, then you should consider moving to the next step.

Step 4: Detach external devices

Eliminating external devices or components ensures that there’s no influence from those devices. What you want to make sure is that there is no device connected to the TV so that they don’t interfere with the functioning of your Television.

However, don’t touch the power cable; sometimes you may disconnect everything, including the power cable. If the problems with the TV become persistent, maybe it is high time to replace it.

Other Dish TV complications

Other Dish TV complications

As we have already stated in the above sections, there are other culprits that might be hindering your Dish receiver from shutting down. This section samples some difficulties that Satellite TV systems are likely to encounter. We have also suggested easy fix for each;

1. Low-quality image quality

Try different receivers to determine whether they all have poor image quality. Troubleshooting specific receivers will solve this issue. Check on the TV and receiver connections to eliminate a blurry receiver’s output.

Make some alterations on the frequency and wait for a while. Try to re-read the strength of the signal. If the strength signal is below 60, start by unhooking the power cable of the receiver. Reset the coaxial connectors of the receiver to the wall jack before reconnecting the receiver.

2. No channels

Check the signal strength and transponders if there are no channels from the list. Make sure you’re in the “All Sub” or “All Chan” guides. If there are no transponders, try performing a QAM test.

3. No images displayed

Check all the linked TV and receivers in your house to the satellite. If you don’t see any image, there’s a signal problem. Troubleshooting should be done on each equipment.

You might be interested to read also our another comprehensive article of: Samsung TV Horizontal Lines on the Screen


  • My Dish receiver turns itself on. What could be the problem?

Electrical power issues are likely to be held responsible for such misfortunes. However, sometimes the dish itself is problematic.

  • What will happen when I reset my Dish receiver?

Resetting the Dish deletes all the “Favorite Lists”.

Final words

From the above discussions, you can realize that dish receivers might be affected with a lot of complications like no channels, low quality images, and missing channels. Luckily, we have discussed how these issues can be pinned down.

Dish receivers won’t turn off should be a thing of the past. However, you should be in a good position to identify the challenges so that you can fix them easily. 

Leave a Comment