Cozy wall heaters help users stay in cold areas or during the winter seasons since they provide comfort and warmth in the house. Cozy heaters are the number one world’s best heaters as they have high-quality components and everyone likes using them. The heater is a gas heater that can have some problems when you are not keen on using it.
The cozy heaters not turning on are a common problem since it is a gas heater that depends on gas to provide heat. Therefore, it fails to work when the gas supply agents fail to provide the required gas or something else is loose with the connection. However, all the problems associated with failure have a solution that you can choose to fix.
The article below shows the causes of the cozy wall heater not turning on and the steps for fixing the issue. There are also frequently asked questions and a conclusion to summarize the article.
How to fix cozy wall heater not turning on
When your cozy wall heater is not turning on, you need to check on the whole system and identify issues and damages with your system. It is good to try fixing the problems by yourself so that if they fail to work, you can now consult a professional to help fix the issues. Remember, some cozy wall heaters get beyond repair damages, and the only solution is a replacement. Below are some ways to fix the issue:
|Check the cozy wall heater carefully
|To identify the issues with the heater
|Check Amazon for the best Cozy wall heater
|Replace the fuse if it is bad
|To remove the bad fuse.
|Check Amazon for the best fuse.
|Check the heater’s wiring system.
|To fix the loose or broken wires.
|Set the thermostat to the right temperature
|To ensure the thermostat works correctly
|Set the correct voltages with the cozy wall heater
|To have the proper voltages with the heater.
1. Check the cozy wall heater carefully
A cozy wall heater not turning can be due to some of the problems with the components. Therefore, it is good to check the whole cozy system and identify any issues with the fuse if it is correct. In most cases, the fuse can be blown so that the heater is not turning on.
2. Replace the fuse if it is bad
After checking the issue with the fuse and knowing it is wrong, ensure that you replace the fuse immediately for the cozy wall heater to work again correctly. After replacing the fuse, try turning on the cozy wall heater and checking if it is working as you expect. Ensure that the new fuse works correctly and connects correctly to the needed area.
3. Check the heater’s wiring system
At this step, you need to check the wiring system to see if it has any issues to fix, if the problem with the fuse is solved or if the fuse is okay, but the heater is not working. The wiring system of the heater may have issues that make the heater not work since the wires are the pathway that transmits power or gas from the source to the system.
All you need to do here is turn off the wall heater and remove it from the wall, then place it in an open area where you can work with it. Open the wires and scrutinize them. Fix any loose wires by tightening them and if they are damaged, replace the wires with new ones and try turning on the heater. Check Amazon for the best wires to use in the cozy wall heater.
4. Set the thermostat to the right temperature
At this step, after fixing the wires and fuse, check the thermostat and ensure the thermostat’s temperature is suitable for the cozy wall heater to detect if the house needs warmth to start or stop if the house is cold.
5. Set the correct voltages with the cozy wall heater
Ensure that the voltages of the heater are correct for the heater to work correctly. However, if the problems persist after correcting all the upcoming issues, consider consulting a technician or electrician and maybe replacing wires. And you can choose to replace the whole system if you know clearly that it is old enough for a replacement.
How to turn on the cozy wall heater
You need to follow a few steps when you want to turn on the heater to test if it is wrong or good. Below are some of the few steps:
i. Check and locate the position of the wall heater knob
Check the cozy wall heater as a whole and carefully locate the knob. The knob helps in starting the wall heater.
ii. Turn on the knob you located
After getting the position of the knob in the heater, turn it on to the pilot and push it down slowly to the ignition button. The process is repeatable so that you can do it more times only if the knob fails to ignite and turn on the lights. If the problem keeps popping and continues, look for the best solution to fix the issue after inspecting the ignition button for any issues preventing the knob from working.
iii. Hold the ignition button for some time before releasing it.
After working with the knob and knowing that the ignition button works correctly and that the pilot’s light is on, you need to hold on to the ignition for some time before you release it to turn it on entirely. The maximum time you should hold on to the ignition button is about ten to fifteen seconds.
iv. Put on the settings of the wall heater and adjust the temperature to the desired level.
Set the wall heater with what is needed in the heater and the temperatures of the thermostat to the level recommended with the heater so that it can work properly in the house.
Causes of the cozy wall heater won’t turn on
There are some more issues with the cozy wall heater that can cause it to fail to turn on. The issues can be with the heater’s components that have failures or with poor connections. Below are some of the causes, and later will discuss how to fix them:
- The gas’s primary supply source can be off
A cozy wall heater can fail to turn on, and you have to worry about what is the problem. As the cozy heater, you must ensure that everything is ready before concluding. Therefore, in this case, check the gas primary supply source and ensure it is on before saying the heater is not turning on.
- The low temperature of the thermostat
A thermostat should have a high temperature to work correctly in the house. A low temperature makes the cozy wall heater fail to turn on. Therefore you need to ensure that the thermostat is set to higher temperatures for all the operations to be proper. Keeping the thermostat at lower temperatures for a long time can make it faulty and, after some time, totally fail to work in the heater.
- It is clogging the burner orifice.
The cozy wall heater has a burner orifice that is clogged inside that prevents the heater from turning on. Usually, you do not need to have dirty particles blocking any place in your system with any device. In this case, you need to ensure that the burner orifice is clean by removing the dirty particles or wiping them. The other thing is that you need to ensure that the burner orifice is the right size and that you do not need to use a large orifice. Check on the manual to know the correct size orifice you need to use with the cozy wall heater.
- Defective thermostat
A defective thermostat causes failures with turning on the cozy wall heater since it does not produce the right thing the heater needs and that it is the one to detect that the heater needs to start. Maybe there is a lot of heat or cold. Therefore, if the thermostat is defective, the heater will not turn on, and you need to fix the issue for the heater to work correctly. Check Amazon for the best thermostat
- Defective valve
A defective valve prevents the flow of air and other components to the cozy wall heater that the device will not turn on since it lacks all the resources that the heater needs to start. Therefore, the heater user considers ensuring that all the wiring and valves are in the correct position for the heater to work properly; if the valve is defective to the point that it cannot hold on repairs, choose to replace the valve immediately.
- Incorrect gas input
Incorrect gas input causes the cozy wall heater to fail to turn on since it lacks enough gas to start. The major causes of incorrect gas input can be the unchecked gas input or that the orifice has damage to most of its parts. Therefore, to fix the problem choose to recheck the gas input and ensure that everything is correct, then clean the orifice and ensure that it has the right size for operations.
- Lacks voltages to the valve
The lack of voltages to the valve shows that the valve is not receiving any source of power for the heater to turn on. Therefore, in such a case, you need to check the valve’s voltage and ensure that it has 24 volts.
You might be interested to read also our another comprehensive article of: Why My Thermostat Clicks but Nothing Happens?
You can be worried about how you can fix the heater when it is not turning, yet you have not checked the issues or turned on the parts with the heater. Therefore, before concluding that there is something wrong with the heater, check on the minor issues as per the guide.
Consider consulting a technician if all you did is not add up when fixing the problem. However, following up on the steps can help you as the user.